User`s guide

21-0381E v4.7.4
Welcome Report
Control Admin Sys Config Tech-Ref
69
button is flashing, this indicates that an AC-
failure is in effect at the panel.
- Monitor: This allows selecting the account to
be monitored by the status toolbar (for the
operator who is presently logged in).
(If you change this, you can save your changes by
opening the V
iew menu, selecting Desktop
Settings, and then Save).
The toolbar is active only when the Guardall Director
software is connected with the associated panel(s).
This does not
effect the account to be monitored in
the monitoring window. (The monitoring window
pertains to the account that is selected (double-
clicked) in the 'tree.)
Selecting the Account to be Monitored
by the Status Toolbar
For systems with multiple accounts, you can
set the account to be monitored by the status
toolbar (for each operator who is logged in):
Click Monitor on the far-right end of the
toolbar (or open the View menu, and select
Change Monitor Account). Then, select your
desired account, and click OK.
When finished, save your changes by opening
the View menu, selecting Desktop Settings,
and then Save.
This does not effect the account to be monitored in the
monitoring window. (The monitoring window pertains to
the account that is selected (double-clicked) in the
'tree.)
The status toolbar is active only when the Guardall
Director software is connected with the associated
panel(s).
(Account Folders and Accounts)
- The account to be monitored by the status
toolbar (identified with a small green square).
Select the desired account, and click OK.
Miscellaneous Status Tasks
Panel Date and Time
Guardall Director lets you check the date and
time stored at a system panel, compare it with
that at the host computer, and adjust the
panel's date / time to match the computer, if
necessary.
Initiate a Connection, and Access this
Topic
See if you're already connected with the
panel(s) by checking the status bar at the
bottom of the monitoring window.
Multi-Account Systems: First select [Account
Folders] in the 'tree', and double-click the desired
account.
If not presently connected, initiate a connection
with the desired panel(s).
Monitor (from the Status Toolbar)