User`s guide

74 Guardall Director V4.74 User's Guide 21-0381E v4.7.4
-----------------------------------------------
- On This Screen: This shows various
physical status aspects for the specific
panel.
- [Print]: This allows printing the on-
screen diagnostic data.
Tip: A print-setup screen will appear—
allowing you to select a printer, and set up
the print-job as desired.
- [OK]: This saves the on-screen data
(internally), and closes the Remote
Diagnostics screen.
Tip: You can also run reports based on
previous status/diagnostic sessions.
Related
: Reports, Panel Diagnostic
 Reporting on Panel Diagnostics
Note
: The Director software retains 24
months worth of diagnostics sessions, or
the last 100—whichever is greater
.
Checking the Status of
Panels (Equipment)
Panel Status (Equipment)
Conditions Monitored for Each Panel
Various conditions (such as low battery,
tampering, etc.) can be monitored for each
panel. This helps to maintain the integrity of
each system panel.
Also See: Control & Status, Panel Control & Status,
System, Power
 Checking Power Levels
Items to be Monitored
: To set the conditions to be
monitored for a panel, refer to "Equipment Settings
(Pseudo / Internal Inputs)".
Initiate a Connection, and Access this
Topic
See if you're already connected with the
panel(s) by checking the status bar at the
bottom of the monitoring window.
Multi-Account Systems: First select [Account
Folders] in the 'tree', and double-click the desired
account.
If not presently connected, initiate a connection
with the desired panel(s).
For details, refer to "Connecting to the Associated
Panel(s), An Overview" (under "Checking Status &
Controlling Items", previous).
-------------------------
Then, select Control & Status - Equipment
from the MyTools bar, or
select Equipment
under "Control & Status: System" in the 'tree'.
Using the Tree: Click your site/account button in the
tree, and open Control & Status, Panel Control &
Status, and System (click the "+" beside each topic).
Control & Status Panel Control & Status
System [Get System Status]