User`s guide
21-0381E v4.7.4
Welcome Report
Control Admin Sys Config Tech-Ref
75
Alternative: You can also click Trouble on
the status toolbar.
Login with your user ID and PIN if
prompted for this.
Panel Groups and Panels: Open your
specific panel group and panel if these are
listed in the 'tree'. Tip
: The 'tree' can be set
to show Control & Status topics in a single
list (logical tree view), or on a panel-by-panel
basis. For details, refer to "Other Desktop
Choices".
If the status screen is blank or inactive (or if
you'd like more information), refer to
"Accessing the Control and Status Topics for
a Panel" (under "Checking Status &
Controlling Items", previous).
Working with This Screen
When the status screen appears, use the Grid
/ Form toolbar-button to select your preferred
view-mode.
Forms view: All equipment topics on a graphical
screen;
Grid View
: A list of monitored equipment topics.
Multi-Panel Systems
: Select the desired panel at the
bottom of the form (if not shown/selected in the 'tree').
Then, refer to the selection-descriptions for this
screen while viewing the available status
information.
Tip: Any alarm conditions that are in effect will be
shown in colour. Be sure to dispatch someone to
deal with any conditions that require attention.
Individual items that are grey in colour are not presently
being monitored by the system.
To block the monitoring of a specific condition:
Go to "ConfigurationSystemEquipment" for the
specific panel, and set the "Preprocess" for the desired
item to "Undefined". For details, refer to "Equipment
Settings (Pseudo/Internal Inputs)".
-Panel (bottom of the form): This is where you
select a desired panel (for systems with more
than one).
Alternative: You can also set the 'tree' to list status
topics on a panel-by-panel basis. For details, refer to
"Other Desktop Choices".
- (top of screen): Status of various items
pertaining to a specific account or site.
- Fuse: Whether any of the fuses on this system
panel has failed.
- Reporting (Alarm Communications): Status of
communications links (phone and high-security
HSC line), and whether or not this has affected
an alarm transmission.
- System Configuration: Panel programming
issues/errors.
- Module Status: Items pertaining to an
expansion module (door controller, point
expansion module, etc.).
- [Detail Module Status]: Jumps to the
module/POD status window (grid-view), so you
can quickly locate the device that is in trouble.
Checking Power Levels
(V4.4)
System Power Status
The power status screen allows you to check
the status of various items pertaining to mains
input voltage, battery life remaining, etc.
Note: Some features are supported only by xL panels.
Unsupported items will be shown as zero (0).
Also See: Control & Status, Panel Control & Status,
System, Equipment
Checking the Status of Panels (Equipment)
Control & Status Panel Control & Status
System Equipment