User`s guide

21-0381E v4.7.4
Welcome Report
Control Admin Sys Config Tech-Ref
79
Notes: Since each keypad typically
pertains to a separate, privately-owned
dwelling, any arming changes should
typically be coordinated with the occupant.
Prior to v4.31, these buttons were 'display-
only'. This feature requires panel firmware
4.25, and
'Panel Control & Status' operator
permission.
- Alarms: This area shows any alarms
for the suite/facility (fire, tripped
sensors, or someone tampering with
the keypad). The "Siren Type" is
indicated as well (None, Sonalert,
Siren, or Fire).
-------------------------
- [Silence]
(V4.31): This allows
silencing an alarm for a selected
keypad/suite.
-------------------------
- Input Points: This area lists the suite security
keypad's input points, and shows the status of
each one (i.e., whether or not each sensor has
been 'tripped').
Note: The number of input points supported depends
on the type of suit security keypad installed.
- Panic Keys: This area lists the suite security
keypad's panic keys, and shows the status of
each one (i.e., whether or not any panic keys
have been pressed).
Note: The number of panic keys supported depends
on the type of suit security keypad installed. For
example, 2-zone keypads support panic key #1 only
(triggered by pressing  and *).
- Output Points: This area lists the suite security
keypad's outputs, and shows the status of each
one (i.e., whether or not any of the outputs have
been fired).
Note: The number of programmable output points
supported depends on the type of suit security keypad
installed.
-----------------------------------------------
- Security Suite (bottom of form): This is where
you select a suite security keypad to view
diagnostic information. This area shows a
reference number assigned by the system, plus
the name/description of the suite/facility as
defined under 'Configuration'.
- Security Suite Information: Information
pertaining to the selected suite
(version number,
maximum and present baud rate, etc.)
.
- Security Suite Status: Various status topics for
the selected keypad.
- Communication Statistics: This shows
information pertaining to the module bus
communications success rate with this device
over a period of time.
- [Refresh Communication Statistics]: This
updates the screen (i.e., rechecks
communications statistics).
- [Reset Communication Statistics]: This
restarts the counters ('i.e., resets the statistics
values to zero).
Checking Status or
Controlling Items by Area
"Area Users" Screen
: A second screen is available as
Control & Status - Area Users in the MyTools bar, or
Area Users under "Areas " in the 'tree'. This pertains to
the presence of user activity, the number of users in an
area (user count), and resetting APB tracking for an
area. Related Topic
: Area Users (to follow).
Control & Status by Area
The area status screen shows the status of
items associated with each system 'Area', and
allows controlling many things (arm or disarm
an area, unlock doors, etc.)
Permissions/Authorities: This feature can be used by
operators with "Control and Status" permission, when
Control & Status Panel Control & Status
Suite Security Diagnostics