User`s guide

21-0381E v4.7.4
Welcome Report
Control Admin Sys Config Tech-Ref
83
- Area (bottom of form): This is where
you select an area to view its status or
control items. This shows a reference
number assigned by the system, plus
the name/description of the area as
defined under 'Configuration'.
Status
- Activity in Area: Whether or activity
has occurred in the specific area.
(This is based on users entering or
leaving the area, and/or a custom
'Activity Monitor' input point being
tripped.)
- User Count: This is the number of
users (or vehicles) in the area (based
on access granted in to and out of the
area).
Full: Whether or not the area contains the allowed
number of users/vehicles.
- [ Reset User Count ]: This allows resetting this
area's user-count as desired. (Details to follow /
below.)
Anti-Passback
- [ APB Reset ]: This allows resetting the
antipassback status pertaining to the selected
area, for all users. (Details to follow / below.)
Confirm/Unconfirm Alarm
(UK/ACPO Panel Mode)
- Confirmed Alarm: This indicates if there are
any confirmed alarms in the selected area;
- Unconfirmed Alarm: This indicates if there are
any uncomfirmed alarms in the selected area;
- [ Reset Confirmed Alarm ]: This allows
resetting all confirmed alarms in the selected
area.
Notice: The UK ACPO standard includes strict
requirements regarding confirmed vs. unconfirmed
alarms, and resetting alarms. Interested parties are
expected to be familiar with such details. Installation
requirements can be found in a UK/ACPO appendix of
the advanced installation guide for your specific
panel(s).
Resetting the User-Count for an Area
For areas set to 'count' the number of users
that are present, you may need to reset the
'user-count' on a periodic basis (e.g., to correct
for things such as users entering and/or exiting
when someone else opens the door).
Related Topic: "Configuration Areas Counting.
To reset the 'user-count' for an area:
 Ensure you are connected with the specific
panel(s) as described previously.
 Open the Area Users screen:
MyTools Bar: Control & Status - Area Users
Tree
: Control & Status, Panel Control & Status,
Areas, Area Users
 Access the "Reset User Count" feature for
an area:
Forms View: Select the desired area
at the bottom of window, and then click
[ Reset User Count ].
Grid View
: Locate your desired area in the list, and
click [...] under "User Count".
 Refer to the item-descriptions for this screen
while making your selection.
Control & Status Panel Control & Status
Areas Area Users