User`s guide

ManualsBrandsCSG Security ManualsComputer equipmentNetVision Plus

100

86 Guardall Director V4.74 User's Guide 21-0381E v4.7.4

Elevator Readers: Door control does not apply to

readers in elevator (lift) cabs. To control an elevator

and/or its associated reader, refer to "Checking Status

or Controlling Elevators".

Permissions/Authorities

: This feature can be used by

operators with "Control and Status" permission, when

they log into 'Control & Status' as a user with the

authority to control the specific items.

Also See ( V4.0):

+ Visual Status and Control (Maps and Cameras)

+ To connect: "New Installation? Try the Wizard"

Initiate a Connection, and Access

this Topic

See if you're already connected with the

panel(s) by checking the status bar at the

bottom of the monitoring window.

Multi-Account Systems: First select [Account

Folders] in the 'tree', and double-click the desired

account.

If not presently connected, initiate a connection

with the desired panel(s).

For details, refer to "Connecting to the Associated

Panel(s), An Overview" (under "Checking Status &

Controlling Items", previous).

-------------------------

Then, select Control & Status - Doors from

the MyTools bar, or

select Doors under

"Control & Status" in the 'tree'.

Using the Tree: Click your site/account button in the

tree, and open Control & Status, and Panel Control &

Status (click the "+" beside each topic).

this.

Panel Groups and Panels: Open your specific panel

group and panel if these are listed in the 'tree'. Tip:

The 'tree' can be set to show Control & Status topics in

a single list (logical tree view), or on a panel-by-panel

basis. For details, refer to "Other Desktop Choices".

If the status screen is blank or inactive (or if you'd like

more information), refer to "Accessing the Control and

Status Topics for a Panel" (under "Checking Status &

Controlling Items", previous).

Viewing the Status of Specific Doors

Use the Grid / Form toolbar-button to select

your preferred view-mode.

Forms view: Details for one door at a time;

Grid View

: All defined doors in a list.

Now, select a desired door in the list.

Tip: In 'forms' view, you can select an item at the

bottom of the form, or use the 'Find' and 'Find Next'

buttons (binoculars) to search by name (or 1st few

characters--e.g., nam*

Then, refer to the selection-descriptions for this

screen while viewing the status topics for the

desired door(s).

Tip: Active status items, and available buttons are

displayed in colour. Be sure to dispatch someone to

deal with any conditions that require attention.

Controlling a Specific Reader or Door

To unlock or re-lock a door, or change one of

its operating parameters:

 Select the desired door (forms view: bottom

of the window);

 Then select the desired command from one

of the drop-down lists on the screen.

In 'Grid' view, use the small button to the right of your

desired topic to select a command.

If button(s) are not available, this means you do not

have 'Door Control' authority. If cards are presently

'locked-out', you'll need to reinstate card-access before

unlocking the door. Locking-out cards automatically

causes the door to lock.

Doors can be set to unlock and relock at certain times

and/or in-sync with the arming state for the associated

area. For details, refer to "Areas and Related Settings",

and "Doors, Readers, and Related Settings".