User`s guide

88 Guardall Director V4.74 User's Guide 21-0381E v4.7.4
or remove access-control for all floors or
individual floors--as accessed from a specific
elevator (lift) cab.
Permissions/Authorities: This feature can be used by
operators with "Control and Status" permission, when
logged into 'Control & Status' as a user who has "door
command" authority, and will affect only the floors they
have the authority to access.
Tip: You can also secure or desecure floors as
accessed from all
elevator (lift) cabs. For details, refer
to "Viewing Status or Controlling Floors".
Also See ( V4.0):
+ Visual Status and Control (Maps and Cameras)
+ To connect: "New Installation? Try the Wizard"
Status/Command Reference:
Secure (controlled access): Access to the floor (or all
floors from this cab) is controlled (i.e., the floor call-
button(s) are initially de
-activated). To access the
floor(s), persons with appropriate authority must present
their access card and/or enter their PIN.
Desecure (free access)
: Access to the floor (or all
floors from this cab) is NOT controlled (floor call-
button(s) are activated).
Partially De/secured
: Floors that presently have free
access through some elevator (lift) cabs, while access
is controlled though some other cabs (and/or where
some floor relays are offline, and the status isn't
known).
Return to Auto
: This re-applies any defined
scheduling for the elevator and its associated floor-
access.
Offline
: This indicates a relay board that is unable to
communicate with the elevator controller.
Initiate a Connection, and Access
this Topic
See if you're already connected with the
panel(s) by checking the status bar at the
bottom of the monitoring window.
Multi-Account Systems: First select [Account
Folders] in the 'tree', and double-click the desired
account.
If not presently connected, initiate a connection
with the desired panel(s).
For details, refer to "Connecting to the Associated
Panel(s), An Overview" (under "Checking Status &
Controlling Items", previous).
-------------------------
Then, select Control & Status - Elevators
from the MyTools bar, or
select Elevators
under "Control & Status" in the 'tree'.
Using the Tree: Click your site/account button in the
tree, and open Control & Status, and Panel Control &
Status (click the "+" beside each topic).
Login with your user ID and PIN if prompted for
this.
Panel Groups and Panels: Open your specific panel
group and panel if these are listed in the 'tree'. Tip:
The 'tree' can be set to show Control & Status topics in
a single list (logical tree view), or on a panel-by-panel
basis. For details, refer to "Other Desktop Choices".
If the status screen is blank or inactive (or if you'd like
more information), refer to "Accessing the Control and
Status Topics for a Panel" (under "Checking Status &
Controlling Items", previous).
Viewing the Status of Specific Elevators
Use the Grid / Form toolbar-button to select
your preferred view-mode. (Forms view is
recommended here.)
Now, select a desired elevator in the list.
Tip: In 'forms' view, you can select an item at the
bottom of the form, or use the 'Find' and 'Find Next'
buttons (binoculars) to search by name (or 1st few
characters--e.g., nam*
).
Then, refer to the selection-descriptions for this
screen while viewing the status topics for the
desired elevator(s).
Tip: Active status items, and available buttons are
displayed in colour. Be sure to dispatch someone to
deal with any conditions that require attention.
Secure/Desecure Floors, or Control
Access Requirements for an Elevator
(Lift) Cab
Use the Grid / Form toolbar-button to select
your preferred view-mode. (Forms view is
recommended here.)
Select the desired elevator (forms view:
bottom of the window).
Refer to the item-descriptions for this screen
while selecting your desired command:
 To apply or remove access-control for all
floors from this elevator cab, refer to the
"Elevator Command" selections.