User`s guide

90 Guardall Director V4.74 User's Guide 21-0381E v4.7.4
Checking Status or
Controlling Floors
Floor Status and Control
The floor status screen shows the status of
access-controlled floors in the system, and
allows applying or removing access-control for
specific floor(s)--as accessed from all elevator
(lift) cabs in the system.
Permissions/Authorities: This feature can be used by
operators with "Control and Status" permission, when
logged into 'Control & Status' as a user who has "door
command" authority, and the ability to access the
specific floors.
Tip: You can also secure or desecure all floors as
accessed from a specific elevator (lift) cab. For details,
refer to "Viewing Status or Controlling Elevators".
Also See ( V4.0):
+ Visual Status and Control (Maps and Cameras)
+ To connect: "New Installation? Try the Wizard"
Status/Command Reference:
Secure (controlled access): Access to the floor is
controlled (i.e., elevator floor call-button(s) are initially
de
-activated). To access the floor, persons with
appropriate authority must present their access card
and/or enter their PIN.
Desecure (free access)
: Access to the floor is NOT
controlled (elevator floor call-buttons are activated).
Partially De/secured
: Floors that presently have free
access through some elevator (lift) cabs, while access
is controlled though some other cabs (and/or where
some floor relays are offline, and the status isn't
known).
Return to Auto
: This re-applies any defined
scheduling for the specific floor (as accessed from all
elevator cabs).
Offline
: This indicates that a relay board is unable to
communicate with the elevator controller (or the
elevator controller module has lost communications
with the panel).
Initiate a Connection, and Access
this Topic
See if you're already connected with the
panel(s) by checking the status bar at the
bottom of the monitoring window.
Multi-Account Systems: First select [Account
Folders] in the 'tree', and double-click the desired
account.
If not presently connected, initiate a connection
with the desired panel(s).
For details, refer to "Connecting to the Associated
Panel(s), An Overview" (under "Checking Status &
Controlling Items", previous).
-------------------------
Then, select Control & Status - Floors from
the MyTools bar, or
select Floors under
"Control & Status" in the 'tree'.
Using the Tree: Click your site/account button in the
tree, and open Control & Status, and Panel Control &
Status (click the "+" beside each topic).
Login with your user ID and PIN if prompted for
this.
Panel Groups and Panels: Open your specific panel
group and panel if these are listed in the 'tree'. Tip
:
The 'tree' can be set to show Control & Status topics in
a single list (logical tree view), or on a panel-by-panel
basis. For details, refer to "Other Desktop Choices".
If the status screen is blank or inactive (or if you'd like
more information), refer to "Accessing the Control and
Status Topics for a Panel" (under "Checking Status &
Controlling Items", previous).
Note
: Grid view does not apply to this topic.
Viewing the Status of Controlled Floors
Access the "Floor" status topic as described
previously/above.
Then, visually skim through the list of floors to
find your desired one(s). (For details on the
displayed information, refer to the selection-
descriptions for this screen.)
Tip: If floor relays are off-line, be sure to dispatch
someone to correct the problem.
Secure/Desecure Floors (Remove or
Apply Access-Control to Floor(s)
Access the "Floor" status topic as described
previously/above.
Then, refer to the item-descriptions for this
screen while selecting your desired command:
 To apply or remove access-control for all
floors as accessed from all
elevator (lift)
cabs, refer to the "Floor Command for All
Floors and All Elevators" selections.