Specifications

10 SiteWatch™ User and Technical Guide
21-0402E v1.1.3
Reports (Report Manager)
• NOTE: Reports will not function unless a Printer Driver is installed on the PC that is running the SiteWatch.
• Selecting “Report Manager” from the
main tool bar will display a selection for
“Reports”. This selection will open the
Report Manager. This feature supplies
the ability to display event particulars on
the PC screen or send them to a printer.
Very Large Reports: These are truncated at
5000 (latest) events to allow the report to run
efficiently. If this occurs, an indication will
appear at the top of the report.
Report Manager Selections
Report Type
Select Type:
− Site Report, Group Report, Exception
Report Only - by Site, Exception Report
Only - by Group, Time Horizon Report -
by Group.
Select Output:
− Screen, Printer, Email (Selecting email will open the PC email system and the report can be transmitted to an
email address.)
Stations
Select Station Group:, Select Stations:.
Interval
− From: Date, Time – To: Date, Time
(Drop down button for date opens a current calender page. The current date, based on the PC settings, is
circled. Arrow buttons on either side of the month’s name will increment or decrement the months of the year.
Selecting a day on the calendar page will set the date in the box. Exit the calender page by clicking the mouse
pointer outside of the calender page.)
“Run Report” to the selected output (screen or
printer) or “Close Report Manager” buttons
Time Horizon Report - by Group
• This report is for viewing the first time a station
began running and when its oldest recording was.
• When the “Time Horizon Report - by Group” is
selected, the main Report Manager screen will
display a selection box labeled “Time Horizon”. The
number of days is entered here as a threshold for
when a station has had their last recording.
• Clicking on “Run Report” on the main Report
Manager screen opens a graph type screen. Days
are numbered from top to bottom on the left side of
the graph. A default of 180 days applies. Stations
are situated on the graph in relation to the number
of days since their last recording. When the amount
of recordings has reached its limit, the last
recording is replaced with a new one.