User`s guide

21-0381E v4.7.3
Welcome Report Control Admin Sys Config
Tech-Ref
329
Also See (Related Topics):
"New Installation? Try the Wizard!"
"Panel Connection Overview"
"Setting Up a New System (Commissioning)"
"Panel Communications and Updates
- Communication Device: The 'Serial Cable
Connections and modems that have been
installed under MS Windows on this PC. Select
the desired one to use with a panel connection.
IP Connections: Secure and regular IP connections
are also supported.
More: IP Connectivity"
Tip: The right-click menu provides "Add" and
"Delete" selections for utilizing additional connections
on this PC, or deleting ones that are no longer
needed.
Note: Parallel connections (LPT ports) do not apply to
this application.
- Modem/Direct: Whether the selected
'communications device' is a modem, a direct-
cable connection, or an IP connection;
- Answer Mode: A setting for modems that tells
the software if it will be communicating with a
standard (external/high-speed) modem, or a
panel's built-in Bell 103 (300-baud)
modem/dialler.
Bell 103 Connections: This requires a USR Sportster
56K modem at the PC. As well, due to speed
considerations, Bell 103 connections are supported
only in smaller systems ("Feature Set" 1, 2, or 3:
one panel / up to 300 users per account). To set the
'feature-set', refer to "Account-Wide Panel Settings".
- Modem Init. for Bell 103 Standard: An
"initialization string" (start-up settings) to be
used for a "Bell 103" connection. Select a
suitable one from the list for your modem.
- Device Status: Whether or not the selected
communications device is properly recognized
by MS Windows.
- Line Status: Whether or not an active panel
connection is presently using the specific cable
or modem connection.
When You Select "Port Configuration"