User`s guide

ManualsBrandsCSG Security ManualsComputer equipmentNVeDVR

21-0381E v4.7.3

Welcome

Report Control Admin Sys Config Tech-Ref

Using This Feature

The photo w indow opens

automatically w henever a person

gains access at the specific door.

Multi-Account Systems: This works only

while the specific account is selected. (Click

[Account Folders] in the 'tree', and double-

click the specific account.)

You can also open the photo w indow

manually by clicking [Show Photo] at

the bottom of the monitoring window.

Window Empty: The photo window is cleared each

time settings are changed for this feature, and when

you select anything outside of the specific account.

Now, visually compare the displayed photo

with the person to verify their identity.

Setting the Window Position

To reposition the photo w indow, s imply c lick-

and-drag its title-bar to the new location.

Closing the Photo Window

To close the photo window at any time, click

the [X] in the upper-right corner.

This screen shows the last 1, 4, or 9 persons

who gained entry (or were denied access) at a

door that you selected for photo-verification.

The photo window is cleared each time you change

settings for this feature, and when you select anything

outside of the specific account.

--------------------------------------------------------------------------

Related Features

Additional features can be u sed in conjunction

with photo-verification (all optional):

• Event-T riggered camera-viewing

See: "Initial Set Up of: Views, Maps, Cameras"

(especially step 3b)

• Card-enrolment (or disabling) readers--that are

also set to unlock.

See: "Reader 1 & 2 Settings for

a Door" (look for [Card Action] ).

• "Command Point" custom input points (e.g.,

to unlock the door, or "Grant Last User").

See: "Input Points—Custom Point Types", and

"Input Points—Monitored Sensors"

• "Grant Last User" command

(right-click the

door on a map)

See: In the section on using maps and cameras,

see: "Controlling an Area or Device" (look for

"Door Commands", then "Grant Last User...").

View (menu) ÖPhoto Verification ÖShow

(or when a person enters at the specific door)