User's Manual

10/33
n BASIC OPERATION
u Turning the Phone ON
Each time the unit powers up it goes through certain “Wake Up”
routines. Upon power up, all indicators will light and your own
telephone number will be displayed momentarily. At this point
your phone is operational and ready for use.
!
LCD backlite turns off after 8 seconds to save power.
Pressing any key relights the Display for another 8
seconds
!
If the NO SERVICE indicator NO Service remains
illuminated calls cannot be placed or received as the
“cellular System” is not available in the area you are
currently in.
Display Own Telephone Number and System ID
üü To display your Telephone Number, press “FNC”,”#”,”1”.
üü To display your System ID, press “FNC”,”#”,”3”.
üü To clear the display, just press “CLR”.
u Making and Receiving Calls
Placing Calls
When entering telephone numbers manually, each digit entered
will appear in the display panel and will scroll from right to left
every time a new digit is entered.
üü To place a call, make sure the power is on (refer to the “Turning
the Phone ON ”on previous page), enter the desired telephone
number and press the SEND key. At this point the IN USE
indicator INUSE will light and the dialing sequence will be
executed.
üü To correct an error made while entering a telephone number,use
the following methods:
l Press the CLEAR key
CLR
to erase the last digit entered.
l Press and hold the CLEAR key
CLR
to erase all the
digits in the display.