User's Manual

19/33
üü To begin your entries into the Scratch Pad, enter the first digit
sequence you wish to store and press the FUNCTION key “FNC”,
“1”. Just repeat this procedure for any following entries.
!
If a telephone number is present in the display panel prior
to your first entry, press the CLEAR key “CLR” to wipe the
display.
Dialing Numbers from the Scratch Pad
Although the Scratch Pad is primarily for use as a temporary Storage
device if one of the entries contains a telephone number (as in the
“recorded message” example given above) it is possible to recall and
dial that entry.
üü To dial a note pad entry containing a telephone number, press the
RECALL key “RCL” and enter the desired location number 90
through 96. When the proper entry is displayed press the SEND
key “SEND” to initiate the dialing sequence.
u Emergency and Priority Dialing
The cellular phone enables you to store a single telephone number up
to 32 digits in length for priority or emergency purposes. Memory
location 97 is reserved for this purpose. To enter an emergency
number, you would use the same procedures described in the section
entitled “Manual Storage” but using 97 as the location number.
üü To dial this special telephone number, press the MEMORY
RECALL key “RCL”, enter the digits “9”, “7” and press the SEND
key “SEND”
within 10 seconds.
!
The Emergency and Priority number will automatically be
redialed up to 3 times at 50 second intervals or until a
connection is made.