User's Guide

18/4140
ringing, press “FNC”, “*”, “9”, “1”, and then press the
“5” or “6” buttons to raise or lower the volume level
respectively.
Monitor Speaker Volume
The volume level of the speaker heard while in Monitor
mode may be adjusted to suit the environment in which the
phone is being used.
üü To alter the volume used during Monitor Mode, while
the IN USE indicator is lit (during conversation),
simply press the “5” or “6” buttons to raise or lower
the volume level respectively.
üü To alter the volume level of the Monitor speaker while
not in use, press “FNC”, “*”, “9”, “4”, and then press
the “5” or “6” buttons to raise or lower the volume
level respectively.
Ø Note: When the speaker is on in Monitor mode, the
handset earpiece is off.
u Memory Functions
Up to 89 numbers can be stored in the Memory Dialing System.
Each location can contain a number up to 32 digits in size.
Manual Storage
Telephone numbers may be stored manually into locations
01 through 89.
üü To use Manual Storage, enter the telephone number to
be stored and press “STO”. The telephone number will
blink on and off until you enter a 2-digit location
number 01 through 89, to which the telephone number
will be stored.
!
If the memory location number selected contains a
previously stored telephone number the newly
entered telephone number will replace the existing