User's Guide

19/4140
one.
Automatic Storage
This feature is used to store telephone numbers in memory
locations automatically.
üü To use the Automatic Storage feature, enter the
telephone number to be stored and press “STO” twice.
The 2 digit location number 01 through 89 to which the
telephone number was stored will be displayed for
approximately 1 second.
!
If there are no available locations, the word
“FULL” will be displayed for 3 seconds and the
previous mode will be restored.
Vacant Memory Location Search
This feature is used to search for unused memory locations
to which telephone numbers may be stored. The Vacant
Location Search function will try to place phone numbers
in memory locations automatically.
üü To use the Vacant Memory Location Search function,
enter the telephone number you wish to store and press
“STO”. At this point you may choose an ascending or
descending search order by pressing the “5” or “6”
button respectively.
üü When the first vacant memory location is found, that
memory location’s number will appear in the display
panel, on the line above the phone number. The
telephone number about to be stored will continue to
flash on and off in the display panel until you either
store the number by pressing “SEND”, or search for
another location by pressing one of the “5” or “6”
buttons.
üü To exit the Vacant Memory Location Search function
without storing the number, just press “END”.