User's Guide

20/4140
Number Search
This feature allows the user to scan, recall and dial
numbers stored in locations 1 through 97.
üü To use Number Search, press the RCL key and use the
“5” or “6” buttons to scroll through the memory
locations. When an occupied location is found, the
memory location number (01 through 97) will be
displayed in the display panel, along with the telephone
number assigned to that location number.
üü To dial a number found in the search process, just press
“SEND” .
üü To exit from the search mode at any time, press
“END”.
!
If there are no telephone numbers stored in
memory, the word “EMPTY” will be displayed.
Memory Redial
Telephone numbers can be recalled and dialed from any
one of 97 different memory locations.
üü To dial a number stored in memory, press the RCL key
and enter the 1 or 2 digit location number 1 through 97,
you wish to dial. When the desired telephone number
appears in the display panel, press “SEND” to initiate
dialing.
!
Locations 90 through 96 are reserved. (Refer to
the “Scratch Pad”)
Location 97 is reserved. (Refer to “Emergency and
Priority Dialing”)
u One-Touch Dialing
This feature permits you to place a call by a single keystroke.