Operation Manual
18 English
5 LED funcon
6 Inial use
Remove the headset from the packing and charge it fully before using
it for the rst me. To do this, connect the provided charging cable to
the headset. The charging socket is located below the right bracket. For
example, a computer or a USB charging adapter can be used for charging.
The baery is fully charged once the LED indicator changes from red to
blue. Always disconnect the headset from the power source aer charg-
ing it to prevent constant recharging. It is advisable to use the headset
regularly to maintain the full performance of the integrated baeries.
The 3.5 mm jack can be used when the headset is switched-on as well
Switching on Blue LED ashes 2 mes
Switching o Red LED ashes 2 mes
Pairing Red and blue LEDs ash alternately
Standby Blue LED ashes 3 mes in 5 seconds
Incoming call Blue LED glows connuously
Low baery status Red LED ashes 2 mes every 2 seconds
Charging Red LED glows connuously If the device is
fully charged, then the blue LED ashed once.