Specifications

Smart Machine Smart Decision
SIM900_AT Commands Manual_V1.07 168 2012.12.10
Response
+CSGS: <mode>
OK
Read Command
AT+CSGS?
Parameter:
Response
OK
ERROR
Write Command
AT+CSGS=<mo
de>
Parameter:
<mode>
0 disable
1 enable, the netlight will be forced to enter into 64ms on/300ms off
blinking state in GPRS data transmission service. Otherwise, the
netlight state is not restricted.
Reference Note
6.2.62 AT+SKPD Enable Keypad Indication
AT+ SKPD Enable keypad indication
Test Command
AT+SKPD=?
Response
+SKPD: (0-1)
OK
Read Command
AT+SKPD?
Response
+SKPD: 0
OK
Response
OK
ERROR
Parameters
<state> 0 Disable keypad indication
1 Enable keypad indication
Unsolicited Result Code
+SKPD: <Keypad Value>, <Keypad Status>
Write Command
AT+SKPD=<state
>
Parameters
<Keypad Value> The value of pressed or released keypad.
<Keypad Status> The status of keypad
0 released
1 pressed