Specifications

Smart Machine Smart Decision
SIM900_AT Commands Manual_V1.07 173 2012.12.10
<Traffic handling priority> 0x00
<Transfer delay> 0x00
<SDU error ratio> 0x00
<Residual bit error ratio> 0x00
<Maximum bitrate DL> 0x00
<Maximum bitrate UL> 0x00
<Maximum SDUsize> 0x00
<Delivery of erroneous SDUs> 0x00
<Delivery order> 0x00
<Traffic class> 0x00
7.2.3 AT+CGQMIN Quality of Service Profile (Minimum Acceptable)
AT+CGQMIN Quality of Service Profile (Minimum Acceptable)
Response
+CGQMIN: <PDP_type>,(list of supported <precedence>s),(list of
supported <delay>s),(list of supported <reliability>s),(list of supported
<peak>s),(list of supported <mean>s)
[<CR><LF>+CGQMIN: <PDP_type>,(list of supported <precedence>
s),(list of supported <delay>s),(list of supported <reliability>s),(list of
supported <peak>s),(list of supported <mean>s)
[…]]
OK
Test Command
AT+CGQMIN=?
Parameters
See Write Command
Response
+CGQMIN: <cid>,<precedence>,<delay>,>reliability>,<peak>,<mean>
[<CR><LF>+CGQMIN:
<cid>,<precedence>,<delay>,<reliability>,<peak>,<mean>
[…]]
OK
Read Command
AT+CGQMIN?
Parameters
See Write Command
Write Command
AT+CGQMIN=<
cid>[,<precedenc
e>[,<delay>[,<rel
iability>[,<peak>
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>