Specifications

Smart Machine Smart Decision
SIM900_AT Commands Manual_V1.07 201 2012.12.10
Response
+CIPSRIP: <mode>
OK
Read Command
AT+CIPSRIP?
Parameter
See Write Command
Response
OK
ERROR
Write Command
AT+CIPSRIP=<
mode>
Parameter
<mode> A numeric parameter which shows remote IP address and
port.
0 Do not show the prompt
1 Show the prompt, the format is as follows: RECV
FROM: <IP ADDRESS>: <PORT>
Reference Note
This command will be effective only in single connection mode
(+CIPMUX=0)
8.2.21 AT+CIPDPDP Set Whether to Check State of GPRS Network Timing
AT+CIPDPDP Set Whether to Check State of GPRS Network Timing
Response
+CIPDPDP: (list of supported<mode>s, list of supported <interval>, list
of supported <timer>)
OK
Test Command
AT+CIPDPDP=?
Parameters
See Write Command
Response
+CIPDPDP: <mode>,<interval>,<timer>
OK
Read Command
AT+CIPDPDP?
Parameters
See Write Command
Write Command
AT+CIPDPDP=<
mode>[,<interval
Response
OK
ERROR