User's Manual

Caution: For proper results, please make sure your device is properly aligned with the inductive charging plate.
Peel the externsl
silicone sleeve from
the internal hard
case.
To open case, apply
gentle pressure to
the small clips
(noted on the
diagram by arrows).
The internal hard
case will open when
all four sides are
unclipped.
Once the iPad is
inside, plug the
lighning charging
cable into the power
socket. Then place
the internal front
(hard) cover on the
top of the case and
gently clip all four
sides shut.
Insert the iPad
into the back
portion of the
hard cover.
Reinstall
the
external
silicone
rubber
sleeve
Power Supply:
Input : AC 100-240V 50/60Hz
Output: DC12V 1.5A
Rating power:18W
Cable Length:1.8M
DC Plug: 5.5*2.1mm male DC Plug
Inductive Charging Case:
Qi Standard: V1.2.4
Input: DC12V 1.3A
Output: DC5V 2.4A(Max.)
Rating Power: 15W
Efficiency: 80-85%(Max.)
Inductive Distance:3-6mm
Input Socket: 5.5*2.1mm female DC socket
Output Plug:Apple Lightning Plug
Charging Time :4-4.5 hours)
Environmental Requirements:
Operating Temperature for iPad: 32℉ to 95℉ / 0℃ to 35℃
Nonoperating Temperature: -4℉ to 113℉ / -20℃ to 45℃
Caution: Please do not place or store the product on or near high-temperature areas like heating devices, open
flame, or in hot cars in extreme heat.
Caution: Please do not place or store the product in or near water, steam, or in any wet, humid, or damp places.