Installation Instruction
A 1 E C 3 B D F 2 A-A B-A A-B B-B A-C C-A P1
Special Function Product Component Item Description Qty.
Diagram of Operable Parts P3
Joint adjustment G I J K L H ※Please adjust the tightness of the joints when they are loose after use for a while. Use "A-A" + "A-B" to adjust the tightness of I & J . Use "A-B" + "A-C" to adjust K . Use "A-B" to adjust L . (Please remove G & positions when done.
2 B-B 4.02 102 mm Concrete Wall B-A Mount Base Installation: 1. Drill hole of 7*30mm and then push B-B into wall. Use B-A to screw 2 . ※ If to install 2 on wood wall or cabinet, drill hole of 4*20mm. Use C-A instead of B-A. There is no need to use B-B.
B Concrete Wall 2 2. Fold B and insert it into 2 . * Note: After attaching, please check if these two items are fastened well for preventing tablet sliding and damaged.
Mount Base on wall Mount Base under cabinet P7
Note for Table-top Stand Forward position: ※ Do not let tablet exceed the front end of B , plane A , to prevent 1 from toppling and damaging tablet. A 1 B Backward position: B ※ When in backward position, do not let 1 exceed plane B to prevent 1 from topping backwardly and damaging tablet.
Dimension of Folded Stand 3.20 81.4 mm 8.98 228 mm 2.23 56.
E D F Attachment Description 1:Press D and stretch Then release D . Attachment Description 2:Put tablet onto E F till larger than the length of tablet. and press D Attachment Description 3:After tablet is fastened, release . Push D F back to fasten tablet. . * Note: After attaching, please check if these two items are fastened well for preventing tablet sliding and damaged.
C A Attachment Description 4:Press A to take off or attach C . * Note:After attaching, please check if these two items are fastened well for preventing tablet sliding and damaged. Attachment Finished Attachment Description 5:After attaching, turn tablet clockwise or anti-clockwise to get the best view.