Use and Care Manual

Instructions:
1. Stand Assembly:
1.Screw wheels into floor base by hand,
then use wrench to tighten.
2. Connecting the Tablet gooseneck holder
1. Insert the pole into the center of the heavy duty base.
2. Place metal washer over tightening screw rod, then screw into the
bottom side of the stand base center, turning clockwise to tighten.
Gooseneck
Metal
Connection
2.Screw wheels into floor base by hand,
then use wrench to tighten.
METAL CONNECTION
HEAVY DUTY BASE
HEIGHT
ADJUSTMENT
KNOB
POLE
METAL WASHER &
TIGHTENING SCREW ROD
Attaching wheels:
Connect wheels to stand base before attaching pole.
Screw wheels into floor base by hand,
then use wrench to tighten.
Smaller Allen Key
3.Screw up the small meter screw inside the
gooseneck to tighten the connection by the
Smaller Allen Key.
Battery Case
3. Rotate plastic grip counter clock-
wise to loosen, then adjust pole to
desired height. Rotate plastic grip
clockwise to tighten.
1. Unlock the holder with the key to
slide out the arms,install your tablet
and adjust the arms to hold it well
and then lock the holder again.
2. Tighten and loosen the gooseneck to
holder connection screw to adjust ease of
rotation.
3. Installing your Device and Adjusting the Floor Stand:
unlock
lock
Heavy-Duty Security Gooseneck Floor Stand
for 7-13 Inch Tablets
PAD-SHFS
[e-mail]