User manual

Chapter 1 Introduction
11
1.73 FIB1-Serial
The FIB1-SERIAL is a fiber converter solution to extend RS-485 transmission
distance up to 2Km over multimode fiber or up to 120Km over single mode fiber. The
converter is equipped with multiple interface circuits, for connection to RS-232, RS-
423, or RS-485/422 (2 or 4 wire).
The FIB1-SERIAL secures data transmission over EMI immune fiber at speeds
up to 256kbps for RS-232 or up to 1024kbps for RS-422/485. All media converters are
available with connectors for SC, ST or FC. In single mode, WDM (Wave Division
Multiplexing with SC connector) is also available in 20 or 40KM reach which will
provide the ability to transmit and receive data using only a single optical fiber. A
unique feature of the FIB1-Serial converter is the use of a common PCB card which
may either be used as a standalone converter (FIB1 series) or placed in the FRM301
rack.
Data Formats :
RS-485/422 2-Wire
RS-485/422 4-Wire
RS-232 + RTS/CTS 5-Wire
RS-232 3-Wire
RS-423 + RTS/CTS 5Wire
RS-423 3-Wire
TTL 3-Wire
Maximum Baud Rate:
RS-485 1024 kbps
RS-232 256 kbps
RS-423 256 kbps
TTL 1024 kbps
Bit Error Rate :
<10
-11
4 diagnostic LEDs : Power, Data, Test & Fiber linking status
Temperature: 0 - 50
o
C (Operating); 0 - 70
o
C (Storage)
Humidity: Up to 90% non-condensing
Consumption <5W
Dimensions: 138mm x 86mm x 20mm (LxWxH).
Weight: 300g.
Emission Compliance: FCC part 15 class A, CE EN55022, EN60950.
Optical: ST/SC/FC type
Data: 6-Pole 'Molex type' with detachable screw terminal