User manual

Chapter 1 Introduction
13
1.75 FIB1-Data
The FIB1-DATA is a media converter for V.35, RS-232, RS-530, X.21 or RS-449
high-speed synchronous or low-speed synchronous and asynchronous data
transmission over optical fiber media. All media converters are available with either
multi-mode or single-mode optical transceiver and with connectors for SC, ST, or FC.
In single mode, WDM (Wave Division Multiplexing with SC connector) is also
available in 20 or 40KM reach, which will provide the ability to transmit and receive
data using only a single optical fiber. A unique feature of the FIB1-Data converter is
the use of a common PCB card which may either be used as a standalone converter
(FIB1 series) or placed in the FRM301 rack.
Technical Specifications
Ports 1 port V.35/RS232/RS530/X.21/RS449
Connector HDB26F (adapter cable to DB15, 25, 37 or MB34)
Line Code NRZ
Data rate n x 64Kbps where n=1 to 32 (64 ~ 2048Kbps),
Low Speed Synchronous & Asynchronous
75 ~ 115.2k baud rate
Clock modes Transparent, Recovery, External, Internal
RC, TC, ETC normal or inverted
Control Signals CTS constantly ON or follows RTS
DSR constantly ON, except during tests
DCD constantly ON, except during signal loss
Test Loops LLB (Local Loop Back)
RLB (Remote Loop Back)
ITU-T V.54
Optical Specifications
Connector Type ST,SC,FC,LC,MT-RJ or WDM(single fiber) connectors.
Optical mode Multi-mode or Single-mode
Wave length 1310nm,1550nm
Power Margin 11dB(2Km,M/M) ,12dB~ 35 dB(15 ~ 120Km,S/M)
Data rate 40.32Mbps
Line coding Scrambled NRZ
Bit Error Rate Less than 10
-11
Environmental
Power consumption <4W
EMI FCC Class A, CE (EN55022), (EN60950)
Dimensions: 122.6 x 85.6 x 20 mm (H x W x D)
Weight 11 Oz (340g)
Temperature 0 - 50
o
C (Operating)
0 - 70
o
C (Storage)
Humidity 20 - 80 % non-condensing (Operating)
10 - 90 % (Storage)