User manual

Chapter 1 Introduction
14
1.76 FIB1-1000E
The FIB1-1000E is a standalone optical fiber media converter for
10/100/1000Base Ethernet to fiber that also provides NMS functions for Link-Loss-
Forwarding, Remote-Monitoring-Status, and Loop-Back-Test. These optional features
are especially useful when the standalone units are linked to the FRM301 with SNMP
management. When auto-negotiation is selected, these units will automatically tailor
themselves to convert 10, 100, 1000 full or half duplex, depending on your specific
network needs. A unique feature of the FIB1-1000E converter is the use of a common
PCB card which may either be used as a standalone converter (FIB1 series) or placed
in the FRM301 rack.
Features and Specifications
Ports one 10/100/1000Base-TX port
one 1000Base-SX/LX port
Two versions support :
SFP with LC
GBIC with SC (3.3V voltage SX-Multi-mode, LX-Single-mode)
* Store and Forward Switching Mechanism
* Auto-Cross over for MDI/MDIX in TP port
* Auto-Negotiation in TP port
* Supports Auto / Force Mode in FX port
* Supports 4K MAC address
* Supports 256K Byte Packet Buffer
* Maximum Packet Size: 1536K Byte
* 6 diagnostic LEDs for Power, TX link/transmit, FX link/transmit, Full/Half Duplex mode,
LLF and speed.
* Supports Link-Loss-Forwarding function
* Supports Loop-Back, remote status
* Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX and 100Base-FX, IEEE
802.3z/ab 1000Base-T, IEEE 802.3x full-duplex flow control, 1000Base-SX/LX standards.
* Data Transfer Rate: 2000Mbps/full-duplex
* Emission Compliance: FCC part 15 class A, CE Mark, European standards
EN55022:1994/A1:1995 A2:1997 Class A, EN61000-3-2:1995, EN61000-3-3:1995 and
EN50082-1:1997
* Power Consumption : < 5W
* Temperature 0 - 50°C (Operating); 0 - 70°C (Storage)
* Humidity 20-80% non condensing (Operating) 10-90% (Storage)
* Dimensions 122.6mm x 85.6mm x 20mm (LxWxH)
* Weight 340g (11 0z)