User manual

Chapter 1 Introduction
15
1.8 Fiber Optical Options
Fiber access connectors are provided for fiber optic cable connection on each
card. Each connector has labeling for "TX" (for transmission of optical data) and "RX"
(for reception of optical data). The various multi-mode and single mode types are
shown below with transmission reach.
10/100 Base Media Converter Card Specifications (Normal type)
Card Type 10/100M/2 10/100S/15 10/100S/30 10/100S/50 10/100S/120 TP Ports Shielded RJ-45 jacks
Fiber Mode Multi Single Single Single Single Cable Cat. 5 UTP up to 100 meters
Wave Length 1310nm 1310nm 1310nm 1310nm 1550nm
Connector * * * * * Environment
Fiber Cablex2 62.5/125um 9/125um 9/125um 9/125um 9/125um Temperature : 0~50 C
Max. Length 2Km 15Km 30Km 50Km 120Km Relative Humidity :
MDI Auto Auto Auto Auto Auto 10%~90% non-condensing
* Available with ST, SC, FC or LC type connectors Dimensions : 17.7x25.5x2.4cm
10/100 Base Media Converter Card Specifications (WDM type)
Card Type 10/100W/20A 10/100W/20B 10/100W40A 10/100W40B TP Ports Shielded RJ-45 jacks
Fiber Mode Single Single Single Single Cable Cat. 5 UTP up to 100 meters
Wave Length 1310/1550nm 1550/1310nm 1310/1550nm 1550/1310nm
Connector SC (WDM) SC (WDM) SC (WDM) SC (WDM) Environment
Fiber Cablex1 9/125um 9/125um 9/125um 9/125um Temperature : 0~50 C
Max. Length 20Km 20Km 40Km 40Km Relative Humidity
MDI Auto Auto Auto Auto 10%~90% non-condensing
Dimensions : 17.7x25.5x2.4cm
1000 Base Media Converter Card Specifications
Card Type 1000-M/550 1000-S/010 1000-S/030 1000-S/050 1000-S/080 TP Ports Shielded RJ-45 jacks
Fiber Mode Multi Single Single Single Single Cable Cat. 5 or 6 UTP up to 100 meters
Wave Length 1310 nm 1310nm 1550nm 1550nm 1550 nm
Connector GB or LC GB or LC GB or LC GB or LC GB or LC Environment
Fiber Cablex1 62.5/125um 9/125um 9/125um 9/125um 9/125um Temperature : 0~50 C
Max. Length 550m 10Km 30Km 50Km 80 Km Relative Humidity
MDI Auto Auto Auto Auto Auto 10%~90% non-condensing
Dimensions : 17.7x25.5x2.4cm
Datacom Converter Card Specifications (Normal type)
Card Type E1B-M/2 E1B-S/15 E1B-S/30 E1B-S/50 E1B-S/120 BNC Ports Coaxial 75 ohm G.703 E1
Card Type E1R-M/2 E1R-S/15 E1R-S/30 E1R-S/50 E1R-S/120 RJ-45 Ports USOC RJ-48C 120 ohm G.703 E1
Card Type T1-M/2 T1-S/15 T1-S/30 T1-S/50 T1-S/120 RJ-45 Ports USOC RJ-48C 100 ohm DS1
Card Type Data/V35/M2 Data/V35/S15 Data/V35/S30 Data/V35/S50 Data/V35/S120 HD26 adapter to MB34F or M (V.35)
Card Type Data/X21/M2 Data/X21/S15 Data/X21/S30 Data/X21/S50 Data/X21/S120 HD26 adapter to DB15F or M (X.21)
Card Type Data/530/M2 Data/530/S15 Data/530/S30 Data/530/S50 Data/530/S120 HD26 adapter to DB25F or M (RS-530)
Card Type Data/449/M2 Data/449/S15 Data/449/S30 Data/449/S50 Data/449/S120 HD26 adapter to DB37F or M (RS-449)
Card Type Data/232/M2 Data/232/S15 Data/232/S30 Data/232/S50 Data/232/S120 HD26 adapter to DB25F or M (RS-232)
Card Type Serial/M2 Serial/S15 Serial/S30 Serial/S50 Serial/S120 Terminal 6 pin wire terminal **
** Supports 3/5 wire RS-232, 2/4 wire RS-485, TTL and RS423
Fiber Mode Multi Single Single Single Single Cable
Wave Length 1310nm 1310nm 1310nm 1310nm 1550nm
Connector * * * * * Environment
Fiber Cablex2 62.5/125 m 9/125 m 9/125 m 9/125 m 9/125 m Temperature : 0~50 C
Max. Length 2Km 15Km 30Km 50Km 120Km Relative Humidity :
10%~90% non-condensing
* Available with ST, SC, or FC type connectors Dimensions : 17.7x25.5x2.4cm
All Datacom converter cards are also available with WDM type transceivers, which must be matched in pairs (A to B) and in either 20KM or
40KM reach.
Please ask our Sales or representative for availability and/or specifications of other transceiver
types not listed above.