User manual

Chapter 2 Installation
22
Kendin
8995E
IC+
IP113A
Fiber
(SC Type)
LED
Indicators
10/100
Ethernet
MDI
Switch
Fiber Duplex
and Loop Back
Test switches
LED
Indicators
10/100
Ethernet
Fiber
(SC Type)
LED Status Indicators
LED Function State Status
PWR Power indicator On Converter has power.
Off Converter has no power.
Blinking No SNMP card with the SNMP Control
card inserted or SNMP card bad.
Fiber Full mode display On Fiber side full duplex mode (200mbps).
Off Fiber side half-duplex mode
Fiber Link Fiber link On The fiber link is ok.
Off No link or the link is faulty.
Blinking Receiving data on the fiber.
LAN 100 mode display On UTP side is operating in 100Mbps mode.
Off UTP side is operating in 10Mbps mode
LAN Full mode display On UTP side full duplex mode (20/200mbps).
Off UTP side half-duplex mode (10/100mbps).
LAN Link Ethernet link On The UTP link is ok.
Off No link or the link is faulty.
Blinking Receiving data on Ethernet.
Legacy media converter card Current Production card
Figure 2-7 FIB-10/100 Old and New Ethernet Media Converter Cards