User manual

Chapter 3 Management System
58
2: Use this key to set the SNMP card's subnet mask.
3: Use this key to set the SNMP card's default gateway.
4: Use this key to set the IP address of the TFTP server, for upgrading.
5: Use this key to set the path and filename of the upgrade image file.
R: This key will reset all settings to factory default.
S: This key will store the settings and reboot the SNMP with new settings.
T: This key will initiate the TFTP image transfer and flash upgrade.
ESC: This key will leave the system setting menu.
Be sure to save and reboot!! Now that the system settings are complete, from the
first menu page press 'M' to configure the management settings.
**************************************************************
*** CTC UNION TECHNOLOGIES CO., LTD V4.06 -17[Oct. 28th] ***
*** FRM-301 Fiber Optical Media Converter Rack Management ***
**************************************************************
Manager Configuration:
Access Password: disable
Community String #1 (Read/Write): secret
Community String #2 (Read Only) : public
Access IP SNMP Community Trap
=============== ============== ====
#1:192.168.0.103 secret Yes
#2:192.168.0.49 secret Yes
#3:192.168.0.130 secret Yes
#4:172.24.1.125 secret Yes
Command Function Key:
'1': Edit Access IP#1 '3': Edit Access IP#3
'2': Edit Access IP#2 '4': Edit Access IP#4
'5': Edit Community#1 String (Read/Write)
'6': Edit Community#2 String (Read Only)
'7': User Password '8': Manager Password
'9': Terminal Access Password ON/OFF
'R': Delete All Setting
'ESC': Main Menu
The following are descriptions of the function keys available and the actions
which they perform.
1-4: Use these keys to set the IP addresses of up to 4 management destinations.
5: Use this key to edit the read/write community string.
6: Use this key to edit the read only community string.
7: Use this key to set the user password.
8: Use this key to set the manager password.
9: Use this key to toggle the terminal access password on or off.
R: This key will delete all manager settings.
ESC: This key will leave the system setting menu.
These managers all
have read/write
access and will
receive trap
messages