User manual

Chapter 4 GUI Software
72
4.3 GUIMGR Configuration and Operation
4.31 Introduction
This section assumes that the GUIMGR application has already been installed on
the workstation as in section 1 and that the SNMP agent has been correctly
configured as in section 2. This chapter will detail the GUIMGR configuration and the
operation of the software in monitoring and controlling the FRM301 Platform Media
Rack.
4.32 Configuration
4.32.1 Start the GUIMGR application
Start the application by clicking the Windows "Start" button => Programs =>
SNMP GUIMGR => GUIMGR. A login password may or may not be required to
enter the application. If password is set from initial installation of the software, it is
"1021". The user password may be changed via the "Config" pull down menu. Trial
versions only need to click the "exe" file or shortcut and by default have no password
set.
Figure 4.14 GUI manager login
Figure 4.15 GUIMGR first started