User manual

Chapter 4 GUI Software
76
4.33 Operation
The interface for the GUIMGR program is a point and click Windows®
application that requires little use of the keyboard.
Trap Display Window
Figure 4.17 Operational GUIMGR screen
From the operational screen, the status of all rack units may be displayed. The
GUI can configure up to 254 racks. Scroll bars on the right allow scrolling through
the racks, if there are many. The Pwr and Fan indicators will display "green" when
two power supplies are active and their fans are operating normally. Line card types
are shown and link status displayed by color code:
"Green" status indicates that both the fiber and copper are linked.
"Yellow" indicates loss of link on the copper side.
"Magenta" indicates loss of link on fiber side.
"Grey" indicates neither copper nor fiber linked
"Black" color indicates an empty line card slot or un-identified card.
If all line cards are shown with "Red" color, it indicates a communication error.
Possibly the configuration is not correct or there is a network error that prevents the
manager from communicating with the agent.
The trap window at the bottom displays trap messages, indicating the source IP
address, the time stamping of the trap and the trap message itself. New messages are
added from the bottom, when the screen is full the messages will scroll up. The
"Clear Trap" button will erase all of the traps displayed and stored in memory.