User manual

Chapter 4 GUI Software
77
4.33.1 Rack Detail
From this main display, we can view the details of any rack by clicking on the
"Rack" button for that particular rack. Select the first device by clicking on the "Rack 1,
Rack 2, Rack 3, etc" button. A new window will open displaying the rack's front and
rear panel details.
Figure 4.18 Rack 1's GUIMGR screen
The front panel graphic shows the operational state of all the installed line cards.
The LED indications are shown in real time. Fan and power status are also displayed
in "green". A "Red" indication on any of the fans, power supplies, or power supply
fans indicates device or power failure.
Each channel line card is shown with the LED indications in realtime. Clicking
on a channel button will enter the detailed configuration screen for that line card.
The 'Save all' button can save all the current rack settings and all line card
settings to a file on the PC. The 'Load cfg' button can then be used to restore the
previously saved configuration data and restore it to the rack.
The 'Close' button will close the rack view window and return to the main
program window.