User manual

Appendix A

A.3 Setup the FRM301

The following screens will show the detailed procedures to setup the

networking for the FRM301 and prepare for TFTP upgrade of the SNMP.

Once the console port is connected to a terminal, the following screen will

display.

**************************************************************

*** CTC UNION TECHNOLOGIES CO., LTD V3.45 -17 ***

*** FRM-301 Fiber Optical Media Converter Rack Management ***

**************************************************************

Main Menu and Rack Status:

1:Slot #1 >> Empty << || 9:Slot #9 >> E1 BNC <<

2:Slot #2 >> Empty << || A:Slot #10 >> 10/100 Base <<

3:Slot #3 >> Empty << || B:Slot #11 >> 10/100 Base <<

4:Slot #4 >> Empty << || C:Slot #12 >> 10/100 Base <<

5:Slot #5 >> Empty << || D:Slot #13 >> 10/100 Base <<

6:Slot #6 >> Empty << || E:Slot #14 >> 10/100 Base <<

7:Slot #7 >> Empty << || F:Slot #15 >> 10/100 Base <<

8:Slot #8 >> Empty << || G:Slot #16 >> 10/100 Base <<

Command Function Key:

'1' to '9', 'A' to 'G': I/O Cards Setting

'P': Show Fans and Powers Status

'R': Refresh Status

'ESC' Logout

'M': Manager Configuration Setup

'S': System Configuration and TFTP Setup

Console:[On line] Telnet:[Off line] GUI:[Off line]

If you are presented with login prompt, please enter the unit's password. If you

forgot it, the super user password for terminal mode is '1021' (no quotes).

The actions we must first take are to configure the TCP/IP settings of the

FRM301, if they are not already set. Next, we will setup the information required to

access the TFTP server. Lastly, once the TFTP server is running on our network, we

will execute the TFTP upgrade.