User manual

Appendix A

Select item 'S', "System Configuration and TFTP Setup"

**************************************************************

*** CTC UNION TECHNOLOGIES CO., LTD V3.45 ***

*** FRM-301 Fiber Optical Media Converter Rack Management ***

**************************************************************

System Configuration and TFTP Setup Menu:

MAC Address : 0002AB091234

1:IP Address : 172.24.1.4

2:Subnet Mask : 255.255.0.0

3:Gateway IP : 172.24.190.254

4:TFTP Server IP : 172.24.1.126

5:TFTP Server Path :

c:\frm3v345.bin

Command Function Key:

'1' to '5': Configure Setting

'R': Reset All Setting to Default

'S': Store Setting and Reboot

'T': TFTP and Flash

'ESC': Main Menu

If the TCP/IP settings are not already correct, use menu items 1-3 to set the

FRM301 for your network. For menu items 4 and 5, set the IP address for the TFTP

server or the PC running the TFTP Server daemon. Enter the path and filename

where the image file is placed on the TFTP server.

For example, to set the TFTP server's IP address, press '4'.

TFTP Server IP->172.24.1.126

TFTP Server Path->c:\frm3v406l.bin

Enter the IP address of the PC running the TFTP service, in our case

'172.24.1.126' and the path to the upgrade file.

If you have made any changes to items 1-5, you must store and reboot the SNMP.

Press 'S' to store the results and reboot the SNMP agent. If this is an online upgrade,

each line card will experience a brief (2 seconds) loss in transmission while the card is

polled by the SNMP at boot time.

Start the TFTP server on the connected PC. In our example, we are using the

CTC Union TFTP server.