User manual

Appendix A
94
When the agent comes back up on our terminal, enter the password, if required,
and again go to the "System Configuration and TFTP Setup" menu.
Press 'T' to start the TFTP upgrade. Press 'Y' to confirm.
Sure to TFTP and Reset ?(Y/N)
TFTP NOW, LOADING....
Loading ok!
Please don't power off! Flashing now...
oooooooooooooooooooooooooooooooo
Flash completed!
System reset! Please wait...
Attached TCP/IP interface to secEnd unit 0
Attaching interface lo0...done
To confirm that a TFTP transfer actually took place, you may view the TFTP
application on the PC before closing it.