User manual

Chapter 3 Provisioning

OK, now let's verify the version number of the SNMP. Login to the terminal of the FRM220.

Note that the version is now 1.01.

**************************************************************

*** CTC UNION TECHNOLOGIES CO., LTD

V1.01

***

*** FRM-220 Fiber Optical Media Converter Rack Management ***

**************************************************************

Main Menu and Rack Status:

1:Slot #1 >> Empty << || 9:Slot #9 >> E1 BNC <<

2:Slot #2 >> Empty << || A:Slot #10 >> 10/100 Base <<

3:Slot #3 >> Empty << || B:Slot #11 >> 10/100 Base <<

4:Slot #4 >> Empty << || C:Slot #12 >> 10/100 Base <<

5:Slot #5 >> Empty << || D:Slot #13 >> 10/100 Base <<

6:Slot #6 >> Empty << || E:Slot #14 >> 10/100 Base <<

7:Slot #7 >> Empty << || F:Slot #15 >> 10/100 Base <<

8:Slot #8 >> Empty << || G:Slot #16 >> 10/100 Base <<

Command Function Key:

'1' to '9', 'A' to 'G': I/O Cards Setting

'P': Show Fans and Powers Status

'R': Refresh Status

'ESC' Logout

'M': Manager Configuration Setup

'S': System Configuration and TFTP Setup

Console:[On line] Telnet:[Off line] GUI:[Off line]

This completes the SNMP upgrade procedure.

This completes the basic chassis provisioning for the FRM220 2U 20 slot Platform Media Converter Rack. You

will find provisioning and use of the web interface in the next chapter, Chapter 4. Specific configuration for line

cards are located in the Appendix, starting with the first release line card, the FRM220-10/100I, in-band managed

Fast Ethernet fiber media converter.