User manual

Chapter 4 Web Based Management
36
4.33 Operation
The interface for the WEB is a point and click application that requires little use of the keyboard.
Figure 4.17 Operational Web GUI screen
From the operational screen, the status of all line card units may be displayed. The GUI can configure up to 10
racks. Scroll bars on the right allow scrolling through the racks, if there are many. The Pwr and Fan indicators will
display "green" when two power supplies are active and their fans are operating normally. Line card types are
shown and link status displayed by color code:
"Green" status indicates that both the fiber and copper are linked.
"Yellow" indicates loss of link on the copper side.
"Magenta" indicates loss of link on fiber side.
"Grey" indicates neither copper nor fiber linked
"Black" color indicates an empty line card slot or un-identified card.
If all line cards are shown with "Red" color, it indicates a communication error. Possibly the configuration is
not correct or there is a network error that prevents the manager from communicating with the agent.
The trap window at the bottom displays trap messages, indicating the source IP address, the time stamping of
the trap and the trap message itself. New messages are added from the bottom, when the screen is full the
messages will scroll up. The "Clear Trap" button will erase all of the traps displayed and stored in memory.