User manual

Appendix A

Data Line Card Detail (second page)

**************************************************************

*** CTC UNION TECHNOLOGIES CO., LTD V4.06 -17[Oct. 28th] ***

*** FRM-220 Fiber Optical Media Converter Rack Management ***

**************************************************************

Slot #07 V.35 Card Status: page:2/2

TD >> Flash << | CTS >> Space << H/W Ver: 1.0

RD >> Flash << | RTS >> Space << F/W Ver: 1.1

| DCD >> Space <<

Fiber >> Link Up << | Test LED >> Off <<

Card Parameter Setup Menu:

0: CTS Setting >> Follow RTS <<

1: RC Polarity Setting >> Normal <<

2: TC Polarity Setting >> Normal <<

3: ETC Polarity Setting >> Normal <<

4: Data Port Loop-Back test >> Off <<

5: Fiber Loop-Back test >> Off <<

6: Reset Channel Setting to Default

Command Function Key:

'0' to '3': Toggle I/O Card Settings

'4' to '6': I/O Card Commands

'R': Refresh Status 'P': Previous Page

'ESC': Previous Menu

The following are descriptions of the function keys available and the actions which they perform.

0: This key toggles the CTS setting between follows RTS or always ON.

1: This key toggles the Receive Clock polarity between normal or inverted.

2: This key toggles the Transmit Clock polarity between normal or inverted.

3: This key toggles the External Clock polarity between normal or inverted.

4: This key toggles the Data port loop back test On or Off.*

5: This key toggles the Fiber loop back test On or Off.*

6: This key will reset the card settings to factory default.

R: This key will refresh the screen display.

P: This key selects the previous configuration page.

ESC: This key will leave the card setting menu.

* During loop back tests, normal traffic is interrupted.