User Manual

8 • EN
OPERATING INSTRUCTIONS
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The power lamp will indicate that the mains cable is c onnected to the wall socke t. The
error l amp will indicate if the battery clamps are incorrectly connected. The reverse polarity protection will ensure tha t the bat-
tery or c harge r will not be damaged.
3. Follow the 6-step display through the charging process.
The battery is ready to start the engine when STEP 3 is lit.
The battery is fully charged when STEP 5 is l it.
4. Stop charging at any time by disconnecting the mains cable from the wall socket .
ERROR
LAMP
FULLY CHARGEDREADY TO USE
POWER LAMP
12V/0.8A
US 0.8
20016572A US 0.8 NG, Manual, Print file 001.indd 8 2011-06-17 11:16:09