Product Manual

ManualsBrandsCTEK ManualsBattery ChargersMXT 14 24V 14A Battery Charger

EN • 3

CHARGING

1. Connect the charger to the battery.

2. Connect the charger to the wall socket. The power lamp will indicate that the mains

cable is connected to the wall socket. The error lamp will indicate if the battery clamps

are incorrectly connected. The reverse polarity protection will ensure that the battery

or charger will not be damaged.

3.Press the MODE-button to select charging program.

4. Follow the indication lamps through the charging process.

The battery is ready to start the engine when

is lit.

The battery is fully charged when is lit.

5. Stop charging at any time by disconnecting the mains cable from the wall socket.

MANUAL

ABSORPTION, READY TO USE

ANALYSE

NORMAL

BATTERY

PROGRAM

ERROR LAMP

RECOND

PROGRAM

SUPPLY

PROGRAM

POWER

LAMP

MODE-

BUTTON

DESULPHATION

SOFT START

BULK

FLOAT, FULLY CHARGED

PULSE, MAINTENANCE CHARGING

TEMPERATURE

SENSOR

INDICATOR

24V/14A

MXT 14

MODE

SUPPLYNORMAL RECOND

RECOND

SUPPLY

24V/14A

MXT 14

MODE

SUPPLYNORMAL RECOND

RECOND

SUPPLY

SUPPLY PLUG*

L: 2000 mm

TEMPERATURE

SENSOR

CONGRATULATIONS

to the purchase of your new professional switch mode battery

charger. This charger is included in a series of professional

chargers from CTEK SWEDEN AB and represents the latest

technology in battery charging.

MAINS CABLE

*Supply plugs may differ to suit your wall socket.

20015551E MXT 14, Manual EU, Print file 001.indd 3 2013-07-23 11:31:02

Summary of content (6 pages)

PAGE 1
MANUAL MXT 14 MAINS CABLE NORMAL SUPPLY RECOND 24V/14A CONGRATULATIONS to the purchase of your new professional switch mode battery charger. This charger is included in a series of professional chargers from CTEK SWEDEN AB and represents the latest technology in battery charging. 1. Connect the charger to the battery. 2. Connect the charger to the wall socket. The power lamp will indicate that the mains cable is connected to the wall socket.
PAGE 2
CHARGING programs Settings are made by pressing the MODE-button. After about two seconds the charger activates the selected program. The selected program will be restarted next time the charger is connected. The table explains the different Charging Programs: Program NORMAL RECOND Battery Size (Ah) Explanation If the error lamp is lit, check the following: 1. Is the chargers positive lead connected to the batterys positive pole? 2.
PAGE 3
CHARGING PROGRAM SOFT START BULK ABSORPTION ANALYSE RECOND FLOAT PULSE 11 2 3 4 5 6 7 8 NORMAL RECOND 28.8V 14A until 27.2V 28.8V 14A until 27.2V Increasing voltage to 28.8V @ 25°C 14A Increasing voltage to 28.8V @ 25°C 14A 28.8V @ 25°C Declining current Checks if voltage drops to 24V 28.8V @ 25°C Declining current Checks if voltage drops to 24V Max 31.6V 1.5A 25.8V‒28.8V 10‒2.3A 27.2V 14A 25.8V‒28.8V 10‒2.3A Max 27.2V 14A SUPPLY Limit: 27.
PAGE 4
TECHNICAL SPECIFICATIONS Charger model MXT 14 Model number 1056 Rated Voltage AC Charging voltage 220–240VAC, 50–60Hz NORMAL 28.8V, RECOND 31.6V, SUPPLY 27.2V Start voltage 2.0V Charging current 14A max Current, mains 2.9A rms (at full charging current) Back current drain* <1Ah/month Ripple** <4% For batteries mounted inside a vehicle 1. Connect the red clamp to the battery's positive pole. 2. Connect the black clamp to the vehicle chassis remote from the fuel pipe and the battery. 3.
PAGE 5
• The charger is designed for charging 24V lead-acid batteries. Do not use the charger for any other purpose. • Check the charger cables prior to use. Ensure that no cracks have occurred in the cables or in the bend protection. A charger with damaged cables must not be used. A damage cable must be replaced by a CTEK representative. • Never charge a damaged battery. • Never charge a frozen battery. • Never place the charger on top of the battery when charging.
PAGE 6
CTEK productS ARE protected by 2011-09-19 Designs Trade marks EP10156636.2 pending US12/780968 pending EP1618643 US7541778 EP1744432 EP1483817 pending SE524203 US7005832B2 EP1716626 pending SE526631 US7638974B2 EP1903658 pending EP09180286.8 pending US12/646405 pending EP1483818 SE1483818 US7629774B2 EP09170640.