Instruction Manual

ManualsBrandsCTEK ManualsPower suppliersMXS 10

EN • 3

CONGRATULATIONS

to the purchase of your new professional switch mode battery charger.

This charger is included in a series of professional chargers from CTEK SWEDEN AB and

represents the latest technology in battery charging.

CTEK COMFORT CONNECT – eyelet M8

CTEK COMFORT CONNECT

MAINS CABLE

CTEK COMFORT CONNECT – clamp

CHARGE CABLE

SUPPLY PLUG*

*Supply plugs may differ to suit your wall socket.

Attach the temperature sensor to the charger.

Attach the temperature sensor to the clamp.

NORMAL

BATTERY

PROGRAM

ERROR LAMP

AGM

BATTERY

PROGRAM

FULLY CHARGEDREADY TO USE

RECOND

PROGRAM

SUPPLY

PROGRAM

POWER

LAMP

CHARGING

1. Connect the charger to the battery.

2. Connect the charger to the wall socket. The power lamp will indicate that the mains

cable is connected to the wall socket. The error lamp will indicate if the battery clamps

are incorrectly connected. The reverse polarity protection will ensure that the battery

or charger will not be damaged.

3. Press the MODE-button to select charging program.

4. Follow the 8-step display through the charging process.

The battery is ready to start the engine when STEP 4 is lit.

The battery is fully charged when STEP 7 is lit.

5. Stop charging at any time by disconnecting the mains cable from the wall socket.

MODE-

BUTTON

TEMPERATURE

SENSOR

TEMPERATURE

SENSOR

INDICATOR

MANUAL

20014905E MXS 10, Manual EU, Print file 004.indd 3 2011-10-11 08:50:46

Summary of content (6 pages)

PAGE 1
MANUAL to the purchase of your new professional switch mode battery charger. This charger is included in a series of professional chargers from CTEK SWEDEN AB and represents the latest technology in battery charging. SUPPLY PLUG* MAINS CABLE CHARGING 1. Connect the charger to the battery. 2. Connect the charger to the wall socket. The power lamp will indicate that the mains cable is connected to the wall socket. The error lamp will indicate if the battery clamps are incorrectly connected.
PAGE 2
CHARGING PROGRAMS Settings are made by pressing the MODE-button. After about two seconds the charger activates the selected program. The selected program will be restarted next time the charger is connected. The table explains the different Charging Programs: Program AGM RECOND Battery Size (Ah) Explanation Temp range Normal battery program 14.4V/10A. Use for WET batteries, Ca/Ca, MF and for most GEL batteries -20°C–+50°C (-4ºF–122ºF) 20–300Ah AGM battery program 14.7V/10A Use for AGM batteries.
PAGE 3
CHARGING PROGRAM SOFT START BULK ABSORPTION ANALYSE RECOND FLOAT PULSE 11 2 3 4 5 6 7 8 AGM RECOND 15.8V 10A until 12.6V 15.8V 10A until 12.6V 15.8V 10A until 12.6V Increasing voltage to 14.4V @ 25°C 10A Increasing voltage to 14.7V @ 25°C 10A Increasing voltage to 14.4V @ 25°C 10A 14.4V @ 25°C Declining current Checks if voltage drops to 12V 13.6V 10A 12.7V‒14.4V 10‒2A 14.7V @ 25°C Declining current Checks if voltage drops to 12V 13.6V 10A 12.7V‒14.7V 10‒2A 14.
PAGE 4
ort ect CONNECT THE CHARGER TO A BATTERY INFO If the battery clamps are incorrectly connected, the reverse polarity protection will ensure that the battery and charger are not damaged. For batteries mounted inside a vehicle 1. Connect the red clamp to the battery's positive pole. 2. Connect the black clamp to the vehicle chassis remote from the fuel pipe and the battery. 3. Connect the charger to the wall socket. 4. Disconnect the charger from the wall socket before disconnecting the battery. 5.
PAGE 5
• The charger is designed for charging 12V lead-acid batteries. Do not use the charger for any other purpose. • Check the charger cables prior to use. Ensure that no cracks have occurred in the cables or in the bend protection. A charger with damaged cables must not be used. A damage cable must be replaced by a CTEK representative. • Never charge a damaged battery. • Never charge a frozen battery. • Never place the charger on top of the battery when charging.
PAGE 6
CTEK PROdUCTS ARE PROTECTEd BY 2011-09-19 designs Trade marks EP10156636.2 pending US12/780968 pending EP1618643 US7541778 EP1744432 EP1483817 pending SE524203 US7005832B2 EP1716626 pending SE526631 US7638974B2 EP1903658 pending EP09180286.8 pending US12/646405 pending EP1483818 SE1483818 US7629774B2 EP09170640.