Owner manual

ManualsBrandsCTEK ManualsPower suppliersMXS 7.0

EN • 3

ABSORPTION, READY TO USE

ANALYSE

RECOND

MODE

12V/7A

MXS 7.0

SUPPLY

NORMAL

AGM

CONGRATULATIONS

to the purchase of your new professional switch mode battery charger.

This charger is included in a series of professional chargers from CTEK SWEDEN AB and

represents the latest technology in battery charging.

CTEK COMFORT CONNECT – eyelet M8

CTEK COMFORT CONNECT

MAINS CABLE

CTEK COMFORT CONNECT – clamp

CHARGE CABLE

SUPPLY PLUG*

*Supply plugs may differ to suit your wall socket.

NORMAL

BATTERY

PROGRAM

ERROR LAMP

AGM

BATTERY

PROGRAM

RECOND

PROGRAM

SUPPLY

PROGRAM

POWER

LAMP

CHARGING

1. Connect the charger to the battery.

2. Connect the charger to the wall socket. The power lamp will indicate that the mains

cable is connected to the wall socket. The error lamp will indicate if the battery clamps

are incorrectly connected. The reverse polarity protection will ensure that the battery

or charger will not be damaged.

3. Press the MODE-button to select charging program.

4. Follow the indication lamps through the charging process.

The battery is ready to start the engine when

is lit.

The battery is fully charged when is lit.

5. Stop charging at any time by disconnecting the mains cable from the wall socket.

MODE-

BUTTON

MANUAL

DESULPHATION

SOFT START BULK

FLOAT, FULLY CHARGED

PULSE, MAINTENANCE CHARGING

20015462E MXS 7.0, Manual EU, Print file 002.indd 3 2011-10-11 07:58:00

Summary of content (6 pages)

PAGE 1
MANUAL to the purchase of your new professional switch mode battery charger. This charger is included in a series of professional chargers from CTEK SWEDEN AB and represents the latest technology in battery charging. SUPPLY PLUG* MAINS CABLE CTEK COMFORT CONNECT CHARGING 1. Connect the charger to the battery. 2. Connect the charger to the wall socket. The power lamp will indicate that the mains cable is connected to the wall socket.
PAGE 2
CHARGING PROGRAMS Settings are made by pressing the MODE-button. After about two seconds the charger activates the selected program. The selected program will be restarted next time the charger is connected. The table explains the different Charging Programs: Program Battery Size (Ah) NORMAL 14–225Ah AGM RECOND Explanation If the error lamp is lit, check the following: 1. Is the chargers positive lead connected to the batterys positive pole? 2.
PAGE 3
CHARGING PROGRAM SOFT START BULK ABSORPTION ANALYSE RECOND FLOAT PULSE 11 2 3 4 5 6 7 8 NORMAL AGM RECOND 14.4V 7A until 12.6V 14.7V 7A until 12.6V 14.4V 7A until 12.6V Increasing voltage to 14.4V @ 25°C 7A Increasing voltage to 14.7V @ 25°C 7A Increasing voltage to 14.4V @ 25°C 7A 14.4V @ 25°C Declining current Checks if voltage drops to 12V 13.6V 7A 12.9V‒14.4V 7‒2A 14.7V @ 25°C Declining current Checks if voltage drops to 12V 13.6V 7A 12.9V‒14.7V 7‒2A 14.
PAGE 4
ort ect CONNECT AND DISCONNECT THE CHARGER TO A BATTERY MXS 7.0 SUPPLY RECOND 12V/7A MODE AGM L NORMA SUPPLY RECOND INFO If the battery clamps are incorrectly connected, the reverse polarity protection will ensure that the battery and charger are not damaged. For batteries mounted inside a vehicle 1. Connect the red clamp to the battery's positive pole. 2. Connect the black clamp to the vehicle chassis remote from the fuel pipe and the battery. 3. Connect the charger to the wall socket 4.
PAGE 5
• The charger is designed for charging 12V lead-acid batteries. Do not use the charger for any other purpose. • Check the charger cables prior to use. Ensure that no cracks have occurred in the cables or in the bend protection. A charger with damaged cables must not be used. A damage cable must be replaced by a CTEK representative. • Never charge a damaged battery. • Never charge a frozen battery. • Never place the charger on top of the battery when charging.
PAGE 6
CTEK PRODUCTS ARE PROTECTED BY 2011-09-19 Designs Trade marks EP10156636.2 pending US12/780968 pending EP1618643 US7541778 EP1744432 EP1483817 pending SE524203 US7005832B2 EP1716626 pending SE526631 US7638974B2 EP1903658 pending EP09180286.8 pending US12/646405 pending EP1483818 SE1483818 US7629774B2 EP09170640.