Owner manual

ManualsBrandsCTEK ManualsPower suppliersMXTS 70

EN • 3

CONGRATULATIONS

to the purchase of your new professional switch mode battery charger. This

charger is included in a series of professional chargers from CTEK SWEDEN AB

and represents the latest technology in battery charging. MXTS 70 is the ﬁrst

charger with multiple adjustable parameters.

QUICK GUIDE

To charge, with last used program settings

WARNING!

Batteries and electronics will be damaged if 12V batteries

are charged in 24V-setting.

Attach the cables

to the charger.

Connect the charger

to the battery

Connect

the charger

to mains supply

Press START/PAUSE-button

to start charging

Press the START/PAUSE-

button to interrupt

charging

Battery cable

female connector +

Temperature sensor

male connector

Battery cable

female connector -

Charger cable

male connector +/-

Mains cable

Clamps

Eyelets M8

Temperature sensor

Mains cable connector

Temperature sensor female connector

MANUAL

20015126D Manual MXTS70, All languages, Print file 003.indd 3 2011-10-11 13:01:26

Summary of content (6 pages)

PAGE 1
MANUAL QUICK GUIDE CONGRATULATIONS To charge, with last used program settings EN to the purchase of your new professional switch mode battery charger. This charger is included in a series of professional chargers from CTEK SWEDEN AB and represents the latest technology in battery charging. MXTS 70 is the first charger with multiple adjustable parameters.
PAGE 2
ChARGING For best possible charging of your batteries the voltage and current is adjustable. In addition to that temperature compensated charging is selectable. See below how to set the parameters for customized charging. 1. 3. Connect the charger to the wall socket The power lamp will indicate that the mains cable is connected to the wall socket. The error lamp will indicate if the battery clamps are incorrectly connected.
PAGE 3
INDICATION LAMPS, DISPLAyS AND ERRORCODES MXTS 70 MXTS 70 12V/70A START MXTS 70 24V/35A PAUSE 12V/70A 24V/35A 12V/70A 24V/35A AGM AGM GEL POWER SUPPLY 12V/70A START/PAUSE LAMP START 24V/35A Indicates that charging has not startedAmp or has been interrupted. MODE MXTS 70 POWER LAMP PAUSE Press START/PAUSE-button to start/resume. 12V/70A Indicates thatAmp mains supply is connected. MODE 24V/35A AGM AGM SUPPLY ERROR LAMP GEL POWER 1 Indicates 2Amp 5 6 that a3 fault has4 occurred.
PAGE 4
CONNECT ThE CABLES ChARGING PROGRAMS If the battery clamps are incorrectly connected, the reverse polarity protection will ensure that the battery and charger are not damaged. Choose program by pressing the MODE-button. Adjust parameters according to "CHARGING" (6–8). Press START/PAUSE button to start the selected program. The table explains the different Charging Programs: Program Battery Size (Ah) NoRmAl 40–1500Ah 20–750Ah Ca/Ca 40–1500Ah 20–750Ah Use for Ca/Ca batteries.
PAGE 5
ChARGING PROGRAMS DESULPHATION MOUNTING SOFT START BULK ABSORPTION ANALYSE RECOND FLOAT 2 3 4 5 6 7 PULSE When permanently mounting the charger, mount the charger on a firm surface. Fix the charger with screws in the four holes. Use screws intended for the surface. Allow space around the charger to not interfere with air cooling. 11 EN VOLTAGE (V) 8 CURRENT (A) 13.6V 27.2V Max 50A Max 25A 12.7V‒14.4V 25.4-28.8V 50‒5A 25-2,5A 13.6V 27.2V Max 50A Max 25A 12.7V‒14.7V 25.4-29.
PAGE 6
TEChNICAL SPECIFICATION Charger model Model number Rated Voltage AC Charging voltage Start voltage Output current MXTS 70 1045 220–240VAC, 50–60Hz Max 15,8V/31,6V 2.0V Max 70A/35A (max 30 sec.) Max continuous 50A/25A Current, mains 6.3–4.