Operation Manual

ManualsBrandsCtek ManualsBattery ChargerXS 3.3

EN • 3

XS 3.3

12V/3.3A

CONGRATULATIONS

to the purchase of your new professional switch mode battery charger.

This charger is included in a series of professional chargers from CTEK SWEDEN AB and

represents the latest technology in battery charging.

CTEK COMFORT CONNECT – eyelet M6

CTEK COMFORT CONNECT

MAINS CABLE

CTEK COMFORT CONNECT – clamp

CHARGE CABLE

SUPPLY PLUG*

* Supply plugs may differ to suit your wall socket.

ERROR LAMP

STANDBY LAMP

CHARGING

1. Connect the charger to the battery.

2. Connect the charger to the wall socket. The Standby lamp will indicate that the mains

cable is connected to the wall socket. The error lamp will indicate if the battery clamps

are incorrectly connected. The reverse polarity protection will ensure that the battery

or charger will not be damaged.

3.Follow the indication lamps through the charging process.

The battery is fully charged when

is lit.

4. Stop charging at any time by disconnecting the mains cable from the wall socket.

MANUAL

DESULPHATION

BULK

ABSORPTION

FULLY CHARGED

PULSE , MAINTENANCE CHARGING

Summary of content (4 pages)

PAGE 1
MANUAL to the purchase of your new professional switch mode battery charger. This charger is included in a series of professional chargers from CTEK SWEDEN AB and represents the latest technology in battery charging. SUPPLY PLUG* MAINS CABLE charging 1. Connect the charger to the battery. 2. Connect the charger to the wall socket. The Standby lamp will indicate that the mains cable is connected to the wall socket. The error lamp will indicate if the battery clamps are incorrectly connected.
PAGE 2
Comfort Connect – + – + Comfort Connect 4 • EN For batteries mounted inside a vehicle 1. C onnect the red clamp to the battery's positive pole. 2. Connect the black clamp to the vehicle chassis remote from the fuel pipe and the battery. 3. Connect the charger to the wall socket 4. D isconnect the charger from the wall socket before disconnecting the battery 5. D isconnect the black clamp before the red clamp. Some vehicles may have positively earthed batteries. 1.
PAGE 3
ERROR LAMP READY TO USE The table shows the estimated time for empty battery to 80% charge BATTERY SIZE (Ah) 14Ah 20Ah 60Ah 75Ah LIMITED WARRANTY TIME TO 80% CHARGED 7h 5h 13h 17h CTEK SWEDEN AB, issues this limited warranty to the original purchaser of this product. This limited warranty is not transferable. The warranty applies to manufacturing faults and material defects for 5 years from the date of purchase.
PAGE 4
• The charger is designed for charging only for batteries according to the technical specification. Do not use the charger for any other purpose. Always follow battery manufacturers recommendations. • Never try to charge non rechargeable batteries. • Check the charger cables prior to use. Ensure that no cracks have occurred in the cables or in the bend protection. A charger with damaged cables must not be used. A damage cable must be replaced by a CTEK representative. • Never charge a damaged battery.