Owner manual

AIB Hardware Reference Connectors
CTI Products, Inc.
68-10842-115
9
AIB HOST
Connector
DE9-female
Signal Name
Cable
Connector
DE9-male Direction
Cable Connector
DB25-male
ASTRO-TAC™
Comparator
J15
DB25-female
Signal Name
RXD 2 < 2 TxD3
TXD 3 > 3 RxD3
CTS 7 < 4 RTS3
RTS 8 > 5 CTS3
DTR 1 > 6, 8 DSR3, DCD3
Ground 5 7 Signal Ground
RCLK 9 > 15 TCLK3
TCLK 6 > 17 RCLK3
DCD 4 < 20 DTR3
Chassis Gnd shell 1 Shield Gnd
Table 7 - AIB <--> Comparator Communication Cable
The HOST connector (9 pin D-SUB female) on the rear of the AIB is used to
connect the module to connector J15 (25 pin D-SUB female) on the back of the
ASTRO-TAC™ Comparator. This port is a synchronous RS-232 port operating
at 9600 baud. Table 7 gives the pinout of the AIB to ASTRO-TAC™ Comparator
communications cable.
This cable is available as an accessory to the AIB. The part number for ordering
this cable is S2-60440.