Manual

HIB Hardware Reference Introduction
CTI Products, Inc.
68-10855-210
1
1. Introduction
The Host Computer Interface Module (HIB) is a member of the Monitoring and
Control Network (MCN™) family of User Interface Modules. Hardware
specifications and configuration information are described in this manual.
The HIB module connects a PC, running CTI Product’s MCN Remote
Comparator Display software (MCN RCD) to the MCN network. The HIB is
used with the MCN RCD software and a Comparator I/O Module (such as a CIB
or AIB) to create a comparator display system. The comparator display system
provides monitoring and control functions for your communications system.
1234
6789
5
8
9
7
A
B
C
D
E
F
0
1
2
3
4
5
6
8
9
7
A
B
C
D
E
F
0
1
2
3
4
5
6
8
9
7
A
B
C
D
E
F
0
1
2
3
4
5
6
CA-80022-100
OPTION B
MODULEGROUP
HOST
MODE
SER
IN OUTNETWORK
PWR ACT
ERR
DC IN
OPTION A RESET SVC
12345678
ON
12
ON
1234
ON
PRODUCTS, INC.
Figure 1 - HIB Front and Rear View
This manual applies only to HIB modules with the unit number S2-60081-xxx,
where ‘xxx’ is the number 200 or greater. Earlier versions of the HIB module
(‘xxx’ is 100 or 101) are not covered by this manual. Manual number
S2-60427-110 describes the earlier version HIB modules. This unit number can
be found on the rear panel of the module.
1.1 Reference Documents
1. Monitoring and Control Network Comparator Display System Manual
Part Number S2-60425
2. Monitoring and Control Network Remote Comparator Display Software
Part Number S2-60428