Manual

CTI Products, Inc. HIB-IP & HIB-IP 8000 Hardware Reference Manual
Appendix A. Factory Default Settings 19
APPENDIX
APPENDIX A. FACTORY DEFAULT CONFIGURATION
Control Processor
Restoring Factory Default Communication Parameters
If the Control Processor communication parameters are overwritten so that the HIB-IP cannot communicate
with the MCN Network, they can be restored as follows:
• Press the “RESET” button on the front of the HIB-IP unit
• After the “ERR” LED goes off, press the “RESET” button a second time.
The Control Processor communication parameters are now restored to factory defaults.
IP Address Parameters
The units are factory programmed as follows:
• IP Address: 192.1.1.1
• IP Address Mode: Unicast
• Subnet Mask: 255.255.255.0
• PC IP Address 192.1.1.201