Owner manual

Designing an MCN system
MCN Comparator Display System Planner Page 29
5 Check for maximum number of comparator modules:
Calculate the total number of required comparator modules:
AIB Modules from Step 2 _________
CIB Modules from Step 4 _________
Total
_________
(Maximum 20)
If you need more than 20 CIBs and AIBs on one network, call a system engineer at CTI Products,
Inc.
6 Order the number of Local PC User Interfaces required. Local PCs are connected to the MCN
network (maximum 4000’ total).
S1-60424 Host Computer Interface Module (HIB) with MCN Remote
Comparator Display DOS Software:: Qty ____________
Order the same quantity of serial cables (HIB to PC).
S2-60441 Serial Cable Kit (includes cable and adapter for
9 pin or 25 pin communication ports): Qty: ____________
Order PCs separately. See the System Hardware Requirements section for details.
7 Order the number of Remote (Dial-Up or Leased Line) PC User Interfaces, modems, and serial
cables required. Remote PCs are connected to the MCN network through a HIB Host Computer
Interface located at the network and a pair of modems.
S1-60424 Host Computer Interface Module (HIB) with MCN Remote Comparator Display
DOS Software: Qty ____________
99-10962 Modem V.34 28.8Kb Dial-Up Qty ____________
(For small systems with 1-3 CIB modules, 14.4K modems can also be used.)
(Contact CTI Products, Inc. for leased line modems.)
Order the same quantity of serial cables (HIB to Modem).
S2-60445 Serial Cable HIB-Modem
(9 pin male to 25 pin female): Qty: ____________
Order PC to Modem Cables:
S2-60450 PC (9 or 25 Pin) to Modem Cable Qty: ____________
Order PCs separately. See the System Hardware Requirements section for details.
8
a
b
c
d
e
f
g
Calculate the number of mounts required for Local Modules (Local to Comparators):
DIGITAC Quad Single
Local Modules Rear Mount Rack Mount Wall Mount
DIGITAC CIBs ________ ________ ________
Other CIBs N/A ________ ________
AIBs N/A ________ ________
Local IIBs N/A ________ ________
HIBs (for Modem) N/A ________ ________
Totals Modules
________ ________ ________
Modules per Mount 1 4 1
Divide Total Modules by Modules per Mount and round up to the next whole number to calculate
Subtotal Mounts:
Subtotal Local Module Mounts
________ ________ ________
Continued