Owner manual

Designing an MCN system
MCN Comparator Display System Planner Page 31
13
a
b
Order Punch Blocks
Total 25-pair cables connected to Punch Blocks (from above): ________
Divide the total of 25-pair cables by 2 and round up to the next whole number.
Order the proper quantity of punch blocks.
31-10354 50-Pair Punch Block Qty: ________
14
a
b
c
d
e
f
g
h
I
j
k
l
Order Standard Network Cables
Total the number of network cables required and order them:
S2-60438 9” Network Cable Qty: _________
Used between Modules in a Quad Rack Mount
89-10732 3’ Network Cable Qty: _________
Used between adjacent CIBs mounted to DIGITAC Brackets
Used between Quad Rack Mount Units
May be used between wall mount units
89-10712 10’ Network Cable Qty: _________
Used between adjacent equipment racks
May be used between wall mount units
89-10835 25’ Network Cable Qty: _________
General purpose extended length
89-10836 100’ Network Cable Qty: _________
General purpose extended length
S2-60439 100’ Network Plenum Cable Qty: _________
Plenum rated extended length.
S2-60534 200’ Network Cable Qty: _________
General purpose extended length
S2-60535 200’ Network Plenum Cable Qty: _________
Plenum rated extended length.
S2-60536 400’ Network Cable Qty: _________
General purpose extended length
S2-60537 400’ Network Plenum Cable Qty: _________
Plenum rated extended length.
S2-60538 1000’ Network Cable Qty: _________
General purpose extended length
S2-60539 1000’ Network Plenum Cable Qty: _________
Plenum rated extended length.
Don’t forget to order the network cable to the operator display positions (HIBs).
15 Order Custom Length Network Cables
If your Operator Interface (PC or Console) is located at a distance from your comparators, you will
need to order extended network cables. See the Network Cabling section of this planner for
details.
For custom length cables, order a Base Cable Assembly and then a cable length in feet.
Base Cable Assy:
S1-60197 Cable Assy Network Base Qty: _______
Cable Length:
30-10947 Cable Network Custom Length Qty: _______ ft
30-10957 Cable Network Custom Length Plenum Qty: _______ ft
Order each Base cable assembly on one line, followed by the Cable Length on the next line.
16 Order Network Terminators Each network needs (2) terminators:
S2-60318 Terminator, Network Qty: ___2____
Continued