Owner's manual

MCNRCD™ for Windows
Remote Comparator Display
Introduction
The MCN™ Remote Comparator Display lets
you control your receiver voting system from
your console or service shop. It extends the
comparator lights and switches to a PC
display. The comparator may be located in
the same building or across town.
The Remote Comparator Display is
compatible with:
- Motorola ASTRO-TAC, Digtac,
Spectra-TAC, TAC
- JPS SNV-12 Voters
- M/A-Com / Ericsson / G.E.
Analog Voters
- Doug Hall 4RV/2 Voters
- Alarms & Remote I / O Points
PC Display
The PC display features real-time status
monitoring. The Force-Vote and Disable
switch functions can be controlled from the
PC. The user can custom configure receiver
names and screen positions. Multiple
screens can be built to display additional
receivers.
Dispatch Console Support
The MCN RCD™ software runs as a native
32-bit Windows application under Windows
NT, 2000, or XP. The display window is user
sizeable. This allows you to use it with other
applications such as dispatch console
programs. It provides you with real-time
monitoring and control without using up
valuable console electronics resources.
Get Control of Your Comparator!
An operator or technician can see at a
glance which receivers are receiving, voted,
or failed, and which receiver is causing your
system problems. A Force-Vote function
permits audio monitoring of each receiver
site. A Disable function shuts down bad
receivers until repairs are made.
System noise, interference, and phone line
problems can be difficult to find in a
comparator system. The Remote
Comparator Display is an effective trouble-
shooting tool which helps diagnose system
problems fast.
CTI Products, Inc.
1211 West Sharon Road
Cincinnati, Ohio 45240
USA
phone
+1.513.595.5900
fax
+1.513.595.5983
e-mail
[e-mail]
www.ctiproducts.com